Views: 0 Author: Site Editor Publish Time: 2021-03-30 Origin: Site
Clean Planet Energy recently announced the details of two new ultra-clean fuels. These two fuels are manufactured to replace fossil fuels and can be used on any ship or vessel. New products under the banner of "Clean the Earth and Oceans" can reduce carbon dioxide emissions by more than 75% and can reduce harmful air pollutants by 1,500 times. Both of these fuels are produced from non-recyclable waste plastics, thus eliminating waste that would otherwise be incinerated, landfilled or entering the ocean.
"Ships using Clean Planet Energy's marine distilled fuel can reduce sulfur pollution by more than 1,500 times and 75% of carbon dioxide emissions."
Following Clean Planet’s recent announcement of the launch of ultra-clean aviation fuel, Clean Planet Oceans also includes ultra-clean marine residual fuel (also known as marine fuel or fuel oil) that meets the international ISO 8712 2017 standard, and high-quality marine distillate fuel that meets the highest EN15940 diesel specification. .
In addition to reducing carbon dioxide by 75%, a significant benefit of these new fuels is the reduction of NOx (nitrogen dioxide) and SOx (sulfur dioxide) emissions. Nitrogen oxides and sulfur oxides are some of the most common air pollutants produced by burning fossil fuels, causing approximately 9,000 deaths worldwide every day (source: IHME). Compared with the latest and strict International Maritime Organization regulations, Clean Planet's fuel can reduce sulfur emissions by 1,500 times.
"Sulfur and other air pollutants are measured in ppm (parts per million). According to the IMO 2020 [International Maritime Organization] regulations implemented last year, ships equipped with scrubbers are allowed to burn marine fossil fuel oil. The sea emits 35,000 ppm of sulfur, while ships without scrubbers are allowed to emit 5000 ppm of sulfur into the air,” said Dr. Andrew Odjo, CTO of Clean Planet Energy. “In contrast, Clean Planet Energy’s marine residual fuel contains only At 35ppm, Clean Planet Energy’s marine distilled oil has a sulfur content of only 3ppm. This means that ships using Clean Planet Ocean’s marine distilled oil fuel can reduce by more than 1,500 compared to ships using fossil fuels without scrubbers Compared with ships using scrubbers, sulfur pollution can be reduced by more than 10,000 times."
The UK-based renewable energy company will produce these ultra-clean cycle fuels in its environmentally friendly factories. Clean Planet's environmentally friendly factories can accept and convert non-recyclable waste plastics, otherwise these plastics will be incinerated, landfilled or enter the ocean. According to data provided by parties including the U.S. Environmental Protection Agency and the World Economic Forum, 203 million tons of plastic will become non-recyclable waste this year. This means that Clean Planet's technology not only reduces carbon dioxide emissions and air pollutants, but also Solved the plastic crisis.
"Compared with the use of carbon-based fuels in the marine and aviation sectors, there are currently no legal and large-scale alternatives. Although cars are moving towards electrification, the longevity of large ships means that we will continue to use fossil fuels for many years to come. Fuel engines. By using non-recyclable waste plastics as fuel raw materials for these industries, we can reduce daily carbon dioxide emissions by 75%, keep chemical oil underground, and win precious time in the global battle to achieve zero carbon emissions." Dr. Odjo added.
At present, Clean Planet has two environmental protection factories in the construction stage, and the other 4 are under development. Its goal is to build enough environmental protection factories to realize the vision of processing more than 1 million tons of waste plastics each year. A standard Clean Planet ecoPlant can process 20,000 tons of waste plastic each year.
Tuofang Mould has achieved many Automotive Parts Mould projects. We use advanced 2D&3D software for building complex surface plastic products.
Place of Origin:Zhejiang, China (Mainland)
Model Number:Customized
Shaping Mode:Plastic Injection Mould
Product Material:Steel
high quality customerized plastic injection mould We provide all kinds of plastic injection mould. Automotive mould, household product mould, industry product mould ect.
Place of Origin:Zhejiang, China (Mainland)
Model Number:Customized
Shaping Mode:Plastic Injection Mould
Product Material:Steel
In order to meet the demand of outer looking auto grille mould, Tuofang Mould always active in improving the technology in automotive grille mould. 1. Structure of inner departing surface: we can master the structure and set the departing line on the non-exterior surface to be ejected, so it...
We specialize in making injection mould, such as auto part mould, radiator tank mold, motorcycle parts mold and commodity molds etc.
Tuofang company is manufacturing high quality plastic injection mold like car radiator tank, mask grille, engine coolant tank, fan and fan shroud, car interior part, car rear view mirror.
The following five major elements are indispensable in the processing of double-shot moulding:1.Mold evaluation and product analysisBefore mold design, mold evaluation and product analysis is a must including the appearance, size and shape to avoid unnecessary complication for two-color mold design.
Tuofang company is manufacturing high quality plastic injection mold like car radiator tank, mask grille, engine coolant tank, fan and fan shroud, car interior part, car rear view mirror.
Place of Origin:Zhejiang, China (Mainland)
Model Number:Customized
Shaping Mode:Plastic Injection Mould
Product Material:Steel
The door is an important part of the auto interior parts . It is located on the inside of the car door. It is divided into front, rear, left, and right. It varies according to the car system, usually two doors and four doors. These parts are collectively called door panel series. The vehicle...
Our company manufacturing high quality plastic injection mold like car radiator tank, mask grille, engine coolant tank, fan and fan shroud, car interior part, car rear view mirror
Tuofang Mould are specialized in durable best quality injection mold, relation with Automotive industry, Chemical industry, Motorcycle mold, Commodity mold, and so on.
We are professional in making kinds of auto parts mould. Such as car radiator water tank mould, fan and fan shroud mould, auto interior part mould, grille mould, ,fender mould, car light mould, car rear view mirror etc.
There are high beams, low beams, turn signals, position lights, and daytime running lights in the headlights. The light source of the current headlights is from halogen, xenon to LED, matrix, and laser light sources. The shape of the parts is developing towards thin strips and ring-shaped parts.
Mold Try Out For Automotive Inlet Tank Mold First, Matters needing attention before mold trial 1. Understand the relevant information of the mold: It is best to obtain the design drawing of the mold, analyze it in detail, and ask a mold technician to participate in the trial work. 2. First check...
Tuofang Company is one reliable and professional high quality custom plastic mould manufacturer , which is specialized in designing , manufacturing and produce a variety of plastic injection moulds to international customers
Our company manufacturing high quality plastic injection mold like car radiator tank, mask grille, engine coolant tank, fan and fan shroud, car interior part, car rear view mirror
Our company manufacturing high quality plastic injection mold like car radiator tank, mask grille, engine coolant tank, fan and fan shroud, car interior part, car rear view mirror.
Auto plastic part series mouldauto lamp mould for lens
The door is an important part of the auto interior parts. It is located on the inside of the car door. It is divided into front, rear, left, and right. It varies according to the car system, usually two doors and four doors. These parts are collectively called door panel series.
We specialize in making injection mould, such as auto part mould, radiator tank mold, motorcycle parts mold and commodity molds etc.
We are professional in making kinds of auto parts mould. Such as car radiator water tank mould, fan and fan shroud mould, auto interior part mould, grille mould, ,fender mould, car light mould, car rear view mirror etc .
General car parts (such as car fenders, door handles, rearview mirrors, etc.), the surface will be painted or electroplated, so the surface treatment of the mold is also very important.If these parts are made into molds, you need to pay attention to:
Auto Lamp Mould Car light housing Plastic Injection Mold1+1 Cavities for Rear Lamps
OEM Plastic Injection Auto Rear View Mirror Shell Mould Basic Information ◆Shell material: ABS or PP ◆Shell mold analysis: Moldflow before mold design ◆Shell mold design: 3D format in STP, X_T or IGS, 2D design in dwg, or pdf ◆Shell mold steel: cavity 718H, P20H, 2738, 1.2312; core718H, 2738,...
Place of Origin:Zhejiang, China (Mainland)
Model Number:Customized
Shaping Mode:Plastic Injection Mould
Product Material:Steel
The surface treatment of plastic mould Mould surface treatment is systematic engineering to change the morphology, chemical composition, structure, and stress state of die surface by surface coating, surface modification, or composite treatment technology to obtain the required surface...
high quality customerized plastic injection mould We provide all kinds of plastic injection mould. Automotive mould, household product mould, industry product mould ect.
Our company manufacturing high quality plastic injection mold like car radiator tank, mask grille, engine coolant tank, fan and fan shroud, car interior part, car rear view mirror.
We believe quality begins with mould design capability and consider it to be the key to successful mould making.
We are professional in making kinds of auto parts mould. Such as car radiator water tank mould, fan and fan shroud mould, auto interior part mould, grille mould, ,fender mould, car light mould, car rear view mirror etc.
Mould Design for Car Fog Lamp Hood injection Mould We have highly skilled software, including the latest tools in CAD-CAM, Unigraphics and Pro / Engineer wildfire, by providing them with simulations and alternatives for the development of alternative products with great practical application for...
Our company manufacturing high quality plastic injection mold like car radiator tank, mask grille, engine coolant tank, fan and fan shroud, car interior part, car rear view mirror.
Our company manufacturing high quality plastic injection mold like car radiator tank, mask grille, engine coolant tank, fan and fan shroud, car interior part, car rear view mirror.
Our company manufacturing high quality plastic injection mold like car radiator tank, mask grille, engine coolant tank, fan and fan shroud, car interior part, car rear view mirror.
Our company manufacturing high quality plastic injection mold like car radiator tank, mask grille, engine coolant tank, fan and fan shroud, car interior part, car rear view mirror
Place of Origin:Zhejiang, China (Mainland)
Model Number:Customized
Shaping Mode:Plastic Injection Mould
Product Material:Steel
Place of Origin:Zhejiang, China (Mainland)
Model Number:Customized
Shaping Mode:Plastic Injection Mould
Product Material:Steel
Place of Origin:Zhejiang, China (Mainland)
Model Number:Customized
Shaping Mode:Plastic Injection Mould
Product Material:Steel
We are professional in making kinds of auto parts mould. Such as car radiator water tank mould, fan and fan shroud mould, auto interior part mould, grille mould, ,fender mould, car light mould, car rear view mirror etc.
Place of Origin:Zhejiang, China (Mainland)
Model Number:Customized
Shaping Mode:Plastic Injection Mould
Product Material:Steel
Our company manufacturing high quality plastic injection mold like car radiator tank, mask grille, engine coolant tank, fan and fan shroud, car interior part, car rear view mirror.
We are professional in making kinds of auto parts mould. Such as car radiator water tank mould, fan and fan shroud mould, auto interior part mould, grille mould, ,fender mould, car light mould, car rear view mirror etc.
Place of Origin:Zhejiang, China (Mainland)
Model Number:Customized
Shaping Mode:Plastic Injection Mould
Product Material:Steel
Taizhou Tuofang Plastic Mould Co.,Ltd has been focus on plastic injection mold and molding service ever since its foundation. We have professional engineering and sales team.
Our company manufacturing high quality plastic injection mold like car radiator tank, mask grille, engine coolant tank, fan and fan shroud, car interior part, car rear view mirror.
This truck radiator tank mould is with ten interchangeable insert to make ten diffirent type water tank
As one of the leading motorcycle cover inner mould suppliers in China, we warmly welcome you to buy motorcycle cover inner mould made in China here and get quotation from our factory. All customized products are with high quality and competitive price.
Tuofang company is specialized in designing and manufacturing Plastic Injection.
No. 71 Hequ Road, Chengjiang Street of Huangyan, Taizhou City, 318020, Zhejiang Province, China
