Tuofang Mould are specialized in durable best quality injection mold, relation with Automotive industry, Chemical industry, Motorcycle mold, Commodity mold, and so on.
| Quantity: | |
|---|---|
Usually car have front and rear doors. According to the shape characteristics of the door panel, it can be divided into auto door with speaker mesh and auto door w/o speaker mesh. Of which the quality of auto door w/o leather cover is very high, and the products are not allowed to have defects such as shrinkage, melting line, scratch, and lack of glue.
Consider that when auto door moulding design and manufacturer:
1. The size of the mold base is reasonable.
2. Fully consider cooling. The water line must be applied as much as possible, meanwhile the large diameter is a must.
3. The location of injection gate. Generally auto door panel mold have more than 3 injection points, and melt line is easy to appear at the two point meeting area.
4. Safe and reasonable to ejecting system. Since the mold of the car door panel has a large number of lifter and ejector, it is necessary to avoid flashes caused by small errors in moulding process.
5. Reasonable departing line, convenient for processing and assembly.
6. In the processing of the car door panel with the speaker mesh, pay attention to the air exhaust.
7. Due to the large size of auto door mold, it is necessary to gradually control all aspects in the production and assembly to ensure the quality of auto door mould.
Hot Tags: injection mould for auto door mold, China, suppliers, factory, customized, quotation, made in China, Injection Mould For Auto Door Mold, Car Door Panel Mould, Plastic Injection Mould Car Door Mould, automotive door panel mould
Usually car have front and rear doors. According to the shape characteristics of the door panel, it can be divided into auto door with speaker mesh and auto door w/o speaker mesh. Of which the quality of auto door w/o leather cover is very high, and the products are not allowed to have defects such as shrinkage, melting line, scratch, and lack of glue.
Consider that when auto door moulding design and manufacturer:
1. The size of the mold base is reasonable.
2. Fully consider cooling. The water line must be applied as much as possible, meanwhile the large diameter is a must.
3. The location of injection gate. Generally auto door panel mold have more than 3 injection points, and melt line is easy to appear at the two point meeting area.
4. Safe and reasonable to ejecting system. Since the mold of the car door panel has a large number of lifter and ejector, it is necessary to avoid flashes caused by small errors in moulding process.
5. Reasonable departing line, convenient for processing and assembly.
6. In the processing of the car door panel with the speaker mesh, pay attention to the air exhaust.
7. Due to the large size of auto door mold, it is necessary to gradually control all aspects in the production and assembly to ensure the quality of auto door mould.
Hot Tags: injection mould for auto door mold, China, suppliers, factory, customized, quotation, made in China, Injection Mould For Auto Door Mold, Car Door Panel Mould, Plastic Injection Mould Car Door Mould, automotive door panel mould
