Views: 0 Author: Site Editor Publish Time: 2021-04-14 Origin: Site
Analysis of the Problems in the Development of BMC Injection Molding Machine Industry in China.
Analysis of the Problems in the Development of BMC Injection Molding Machine Industry in China
In recent years, China's BMC injection molding machine has developed rapidly in terms of both quality and quantity, but compared with foreign advanced technologies, the technical level of most enterprises in China still needs to be improved. At present, compared with foreign advanced technology, China's BMC injection molding machine industry mainly has the following problems:
First, it is difficult to solve the contradiction between supply and demand
The domestic market BMC injection molding machine satisfaction rate has been less than 74%, including large, precision, long-life mold satisfaction rate is lower. At present, the molds of industrialized countries are accelerating their shift to China, and international procurement is increasing. With strong market demand, it is difficult to keep up with the development of production for a time. The situation of supply exceeding demand will continue for some time.
Second, the industrial development is not balanced
Although the products of individual companies have reached or approached the international advanced level, overall, the accuracy, production cycle, and service life of molds are still relatively large compared with those of foreign countries, and the overall level of industrial development is relatively low.
Third, the overall level of technology behind
After some enterprises have undergone technological transformation in recent years, the level of technological equipment has become more advanced, and even some foreign-funded enterprises do not lag behind foreigners in terms of equipment. However, it still lags behind most of the company's technological equipment. More importantly, corporate organizations have poor coordination capabilities and it is difficult to integrate or mobilize social resources.
Fourth, the lack of corporate development and innovation
First of all, the proportion of technicians is low and the level is not high enough. Second, there is less investment in scientific research and development. What is more important is that most corporate concepts are backward and do not pay enough attention to innovation and development.
Injection molding machine manufacturers must not only pay attention to product development, but also pay more attention to product innovation. Only companies that have strong technical talents and technological innovation must be able to accurately grasp the individual needs of customers within the first time, so that they can develop steadily and rapidly.
Place of Origin:Zhejiang, China (Mainland)
Model Number:Customized
Shaping Mode:Plastic Injection Mould
Product Material:Steel
high quality customerized plastic injection mould We provide all kinds of plastic injection mould. Automotive mould, household product mould, industry product mould ect.
Tuofang company is manufacturing high quality plastic injection mold like car radiator tank, mask grille, engine coolant tank, fan and fan shroud, car interior part, car rear view mirror.
Place of Origin:Zhejiang, China (Mainland)
Model Number:Customized
Shaping Mode:Plastic Injection Mould
Product Material:Steel
We specialize in making injection mould, such as auto part mould, radiator tank mold, motorcycle parts mold and commodity molds etc.
In order to meet the demand of outer looking auto grille mould, Tuofang Mould always active in improving the technology in automotive grille mould. 1. Structure of inner departing surface: we can master the structure and set the departing line on the non-exterior surface to be ejected, so it...
Tuofang Mould has achieved many Automotive Parts Mould projects. We use advanced 2D&3D software for building complex surface plastic products.
Place of Origin:Zhejiang, China (Mainland)
Model Number:Customized
Shaping Mode:Plastic Injection Mould
Product Material:Steel
Tuofang company is manufacturing high quality plastic injection mold like car radiator tank, mask grille, engine coolant tank, fan and fan shroud, car interior part, car rear view mirror.
The door is an important part of the auto interior parts . It is located on the inside of the car door. It is divided into front, rear, left, and right. It varies according to the car system, usually two doors and four doors. These parts are collectively called door panel series. The vehicle...
The following five major elements are indispensable in the processing of double-shot moulding:1.Mold evaluation and product analysisBefore mold design, mold evaluation and product analysis is a must including the appearance, size and shape to avoid unnecessary complication for two-color mold design.
There are high beams, low beams, turn signals, position lights, and daytime running lights in the headlights. The light source of the current headlights is from halogen, xenon to LED, matrix, and laser light sources. The shape of the parts is developing towards thin strips and ring-shaped parts.
We are professional in making kinds of auto parts mould. Such as car radiator water tank mould, fan and fan shroud mould, auto interior part mould, grille mould, ,fender mould, car light mould, car rear view mirror etc.
Mold Try Out For Automotive Inlet Tank Mold First, Matters needing attention before mold trial 1. Understand the relevant information of the mold: It is best to obtain the design drawing of the mold, analyze it in detail, and ask a mold technician to participate in the trial work. 2. First check...
Tuofang Mould are specialized in durable best quality injection mold, relation with Automotive industry, Chemical industry, Motorcycle mold, Commodity mold, and so on.
Tuofang Company is one reliable and professional high quality custom plastic mould manufacturer , which is specialized in designing , manufacturing and produce a variety of plastic injection moulds to international customers
Our company manufacturing high quality plastic injection mold like car radiator tank, mask grille, engine coolant tank, fan and fan shroud, car interior part, car rear view mirror
Our company manufacturing high quality plastic injection mold like car radiator tank, mask grille, engine coolant tank, fan and fan shroud, car interior part, car rear view mirror.
The door is an important part of the auto interior parts. It is located on the inside of the car door. It is divided into front, rear, left, and right. It varies according to the car system, usually two doors and four doors. These parts are collectively called door panel series.
Our company manufacturing high quality plastic injection mold like car radiator tank, mask grille, engine coolant tank, fan and fan shroud, car interior part, car rear view mirror
We specialize in making injection mould, such as auto part mould, radiator tank mold, motorcycle parts mold and commodity molds etc.
We are professional in making kinds of auto parts mould. Such as car radiator water tank mould, fan and fan shroud mould, auto interior part mould, grille mould, ,fender mould, car light mould, car rear view mirror etc .
Auto plastic part series mouldauto lamp mould for lens
General car parts (such as car fenders, door handles, rearview mirrors, etc.), the surface will be painted or electroplated, so the surface treatment of the mold is also very important.If these parts are made into molds, you need to pay attention to:
Place of Origin:Zhejiang, China (Mainland)
Model Number:Customized
Shaping Mode:Plastic Injection Mould
Product Material:Steel
high quality customerized plastic injection mould We provide all kinds of plastic injection mould. Automotive mould, household product mould, industry product mould ect.
Our company manufacturing high quality plastic injection mold like car radiator tank, mask grille, engine coolant tank, fan and fan shroud, car interior part, car rear view mirror.
OEM Plastic Injection Auto Rear View Mirror Shell Mould Basic Information ◆Shell material: ABS or PP ◆Shell mold analysis: Moldflow before mold design ◆Shell mold design: 3D format in STP, X_T or IGS, 2D design in dwg, or pdf ◆Shell mold steel: cavity 718H, P20H, 2738, 1.2312; core718H, 2738,...
Auto Lamp Mould Car light housing Plastic Injection Mold1+1 Cavities for Rear Lamps
The surface treatment of plastic mould Mould surface treatment is systematic engineering to change the morphology, chemical composition, structure, and stress state of die surface by surface coating, surface modification, or composite treatment technology to obtain the required surface...
We believe quality begins with mould design capability and consider it to be the key to successful mould making.
We are professional in making kinds of auto parts mould. Such as car radiator water tank mould, fan and fan shroud mould, auto interior part mould, grille mould, ,fender mould, car light mould, car rear view mirror etc.
Our company manufacturing high quality plastic injection mold like car radiator tank, mask grille, engine coolant tank, fan and fan shroud, car interior part, car rear view mirror.
Mould Design for Car Fog Lamp Hood injection Mould We have highly skilled software, including the latest tools in CAD-CAM, Unigraphics and Pro / Engineer wildfire, by providing them with simulations and alternatives for the development of alternative products with great practical application for...
Our company manufacturing high quality plastic injection mold like car radiator tank, mask grille, engine coolant tank, fan and fan shroud, car interior part, car rear view mirror.
Our company manufacturing high quality plastic injection mold like car radiator tank, mask grille, engine coolant tank, fan and fan shroud, car interior part, car rear view mirror.
Place of Origin:Zhejiang, China (Mainland)
Model Number:Customized
Shaping Mode:Plastic Injection Mould
Product Material:Steel
Place of Origin:Zhejiang, China (Mainland)
Model Number:Customized
Shaping Mode:Plastic Injection Mould
Product Material:Steel
Place of Origin:Zhejiang, China (Mainland)
Model Number:Customized
Shaping Mode:Plastic Injection Mould
Product Material:Steel
We are professional in making kinds of auto parts mould. Such as car radiator water tank mould, fan and fan shroud mould, auto interior part mould, grille mould, ,fender mould, car light mould, car rear view mirror etc.
Place of Origin:Zhejiang, China (Mainland)
Model Number:Customized
Shaping Mode:Plastic Injection Mould
Product Material:Steel
Our company manufacturing high quality plastic injection mold like car radiator tank, mask grille, engine coolant tank, fan and fan shroud, car interior part, car rear view mirror.
Our company manufacturing high quality plastic injection mold like car radiator tank, mask grille, engine coolant tank, fan and fan shroud, car interior part, car rear view mirror
We are professional in making kinds of auto parts mould. Such as car radiator water tank mould, fan and fan shroud mould, auto interior part mould, grille mould, ,fender mould, car light mould, car rear view mirror etc.
Place of Origin:Zhejiang, China (Mainland)
Model Number:Customized
Shaping Mode:Plastic Injection Mould
Product Material:Steel
Taizhou Tuofang Plastic Mould Co.,Ltd has been focus on plastic injection mold and molding service ever since its foundation. We have professional engineering and sales team.
Our company manufacturing high quality plastic injection mold like car radiator tank, mask grille, engine coolant tank, fan and fan shroud, car interior part, car rear view mirror.
This truck radiator tank mould is with ten interchangeable insert to make ten diffirent type water tank
As one of the leading motorcycle cover inner mould suppliers in China, we warmly welcome you to buy motorcycle cover inner mould made in China here and get quotation from our factory. All customized products are with high quality and competitive price.
Tuofang company is specialized in designing and manufacturing Plastic Injection.
No. 71 Hequ Road, Chengjiang Street of Huangyan, Taizhou City, 318020, Zhejiang Province, China
