Views: 0 Author: Site Editor Publish Time: 2020-01-13 Origin: Site
During the injection molding process, the plastic part is ejected by an ejection mechanism in a plastic mold. But sometimes because of the special shape of the product, it is difficult to remove the plastic part from the cavity of the plastic mold.
One: plastic mold
(1) The mold release structure is unreasonable or improperly located.
(2) The demolding slope is not enough.
(3) The mold temperature is too high or the ventilation is poor.
(4) The surface of the runner wall or cavity is rough.
(5) Improper matching of the diameter of the main flow channel and the diameter of the nozzle hole
(6) The surface of the cavity is rough, or is damaged and worn
(7) The gate is poorly balanced and the melt enters the cavity at different speeds
Two: injection molding process
(1) High injection pressure
(2) Plastic mold temperature is too high
(3) Injection and dwell time are too long
Three: raw materials
(1) Foreign matter mixed in raw materials
(2) Improper selection of release agent
car coolant plastic water tank mouldinjection mouldautomotive part mould1+1 cavity718 mould steelcold runner
Tuofang company is specialized in designing and manufacturing Plastic Injection.
No. 71 Hequ Road, Chengjiang Street of Huangyan, Taizhou City, 318020, Zhejiang Province, China
