Views: 0 Author: Site Editor Publish Time: 2021-08-11 Origin: Site
How to choose an injection molding machine?
The purchase of an injection molding machine is not a small investment. It is a waste to buy an injection molding machine that is too large, and it is not suitable to buy an injection molding machine that is too small. Therefore, choosing an injection molding machine that meets the customer's own product needs has become the most concerned content of every buyer.
When selecting an injection molding machine, the standard for selecting a machine based on the injection weight alone is oversimplification, and it is unreasonable to use only the clamping force. Therefore, we must combine the two and make a reasonable choice.
1. Determination of the injection weight of the injection molding machine
The injection weight is an important parameter of the injection device of the injection molding machine. It is the most commonly used parameter and also the key parameter when choosing an injection molding machine. Expressed in grams (g) or ounces (oz) (Note: 1g=0.035 ounces, 1 ounce=28.35g) Although this parameter is simple and clear, it is also easy to be misunderstood. In fact, the definition of injection weight refers to the maximum plastic injection weight that the injection device can reach when the injection screw is used as a maximum injection stroke under the condition of air injection (without injection into the mold); this parameter is to a certain extent Reflects the processing capacity of the injection molding machine; it can be measured or calculated from theory. (There will be a certain degree of difference between the theoretical value and the measured value.) The rubber used in the test is usually a general PS hard rubber with a specific gravity of 1.05.
First list the specific gravity of commonly used plastics (Vx, g/cm3) in the table below
| Plastic name | Density | Plastic name | Density |
| PVC | 1.35-1.45 | HDPE | 0.94-0.96 |
| PMMA | 1.18 | PE | 0.92 |
| PS | 1.05 | PP | 0.9-0.92 |
| ABS | 1.05 | PSF | 1.24 |
| ABS | 1.02 | PA | 1.04-1.06 |
| ABS | 1.07 | PA | 1.23 |
| ABS | 1.06-1.08 | PA | 1.14-1.15 |
| PPO | 1.06-1.07 | PC | 1.20 |
| POM | 1.42 | PC | 1.4-1.42 |
| PET | 1.1 | PU | 1.14 |
| AS | 1.04 | PPS | 1.34 |
Steps to determine the injection volume:
1. First calculate the weight of the product: w = product weight + gate system weight (weight required for W injection)
2. When the injection molded product is polystyrene (ps), the injection volume of the injection molding machine should be WPS; Wps=(1.3-1.1)*W (product weight + total gate system weight), where the quality of the product When the requirement is high, the coefficient should be a large value, otherwise it can be a small value.
3. When the product is other plastic (named X plastic) according to the above method, first calculate the theoretical injection volume of the plastic that should be Wx; Wx=(1.3-1.1)*(product weight + total gate system weight ); Then according to the density of the plastic (X) converted into the actual weight of the PS material Wps, the conversion formula is WPS=Wx*1.05/VX
4. According to the calculation result Wps and the product sample comparison, select the appropriate injection molding machine
2. Calculation of clamping force of injection molding machine
There are two important factors for calculating the clamping force: 1. Projection area 2. Cavity pressure
1. The projected area (S) is the largest area viewed along the opening and closing of the mold.
2. Determination of cavity pressure (P)
The cavity pressure is affected by the following factors
1. Number and location of gates
2. Gate size
3. The wall thickness of the product
4. The viscosity characteristics of the plastic used
5. Injection speed
Place of Origin:Zhejiang, China (Mainland)
Model Number:Customized
Shaping Mode:Plastic Injection Mould
Product Material:Steel
We specialize in making injection mould, such as auto part mould, radiator tank mold, motorcycle parts mold and commodity molds etc.
Tuofang company is manufacturing high quality plastic injection mold like car radiator tank, mask grille, engine coolant tank, fan and fan shroud, car interior part, car rear view mirror.
In order to meet the demand of outer looking auto grille mould, Tuofang Mould always active in improving the technology in automotive grille mould. 1. Structure of inner departing surface: we can master the structure and set the departing line on the non-exterior surface to be ejected, so it...
Place of Origin:Zhejiang, China (Mainland)
Model Number:Customized
Shaping Mode:Plastic Injection Mould
Product Material:Steel
Tuofang Mould has achieved many Automotive Parts Mould projects. We use advanced 2D&3D software for building complex surface plastic products.
high quality customerized plastic injection mould We provide all kinds of plastic injection mould. Automotive mould, household product mould, industry product mould ect.
Tuofang company is manufacturing high quality plastic injection mold like car radiator tank, mask grille, engine coolant tank, fan and fan shroud, car interior part, car rear view mirror.
Place of Origin:Zhejiang, China (Mainland)
Model Number:Customized
Shaping Mode:Plastic Injection Mould
Product Material:Steel
The door is an important part of the auto interior parts . It is located on the inside of the car door. It is divided into front, rear, left, and right. It varies according to the car system, usually two doors and four doors. These parts are collectively called door panel series. The vehicle...
The following five major elements are indispensable in the processing of double-shot moulding:1.Mold evaluation and product analysisBefore mold design, mold evaluation and product analysis is a must including the appearance, size and shape to avoid unnecessary complication for two-color mold design.
There are high beams, low beams, turn signals, position lights, and daytime running lights in the headlights. The light source of the current headlights is from halogen, xenon to LED, matrix, and laser light sources. The shape of the parts is developing towards thin strips and ring-shaped parts.
Mold Try Out For Automotive Inlet Tank Mold First, Matters needing attention before mold trial 1. Understand the relevant information of the mold: It is best to obtain the design drawing of the mold, analyze it in detail, and ask a mold technician to participate in the trial work. 2. First check...
Tuofang Mould are specialized in durable best quality injection mold, relation with Automotive industry, Chemical industry, Motorcycle mold, Commodity mold, and so on.
Tuofang Company is one reliable and professional high quality custom plastic mould manufacturer , which is specialized in designing , manufacturing and produce a variety of plastic injection moulds to international customers
Our company manufacturing high quality plastic injection mold like car radiator tank, mask grille, engine coolant tank, fan and fan shroud, car interior part, car rear view mirror
We are professional in making kinds of auto parts mould. Such as car radiator water tank mould, fan and fan shroud mould, auto interior part mould, grille mould, ,fender mould, car light mould, car rear view mirror etc.
The door is an important part of the auto interior parts. It is located on the inside of the car door. It is divided into front, rear, left, and right. It varies according to the car system, usually two doors and four doors. These parts are collectively called door panel series.
Our company manufacturing high quality plastic injection mold like car radiator tank, mask grille, engine coolant tank, fan and fan shroud, car interior part, car rear view mirror
We specialize in making injection mould, such as auto part mould, radiator tank mold, motorcycle parts mold and commodity molds etc.
We are professional in making kinds of auto parts mould. Such as car radiator water tank mould, fan and fan shroud mould, auto interior part mould, grille mould, ,fender mould, car light mould, car rear view mirror etc .
Our company manufacturing high quality plastic injection mold like car radiator tank, mask grille, engine coolant tank, fan and fan shroud, car interior part, car rear view mirror.
Auto plastic part series mouldauto lamp mould for lens
General car parts (such as car fenders, door handles, rearview mirrors, etc.), the surface will be painted or electroplated, so the surface treatment of the mold is also very important.If these parts are made into molds, you need to pay attention to:
high quality customerized plastic injection mould We provide all kinds of plastic injection mould. Automotive mould, household product mould, industry product mould ect.
Place of Origin:Zhejiang, China (Mainland)
Model Number:Customized
Shaping Mode:Plastic Injection Mould
Product Material:Steel
Our company manufacturing high quality plastic injection mold like car radiator tank, mask grille, engine coolant tank, fan and fan shroud, car interior part, car rear view mirror.
Auto Lamp Mould Car light housing Plastic Injection Mold1+1 Cavities for Rear Lamps
OEM Plastic Injection Auto Rear View Mirror Shell Mould Basic Information ◆Shell material: ABS or PP ◆Shell mold analysis: Moldflow before mold design ◆Shell mold design: 3D format in STP, X_T or IGS, 2D design in dwg, or pdf ◆Shell mold steel: cavity 718H, P20H, 2738, 1.2312; core718H, 2738,...
The surface treatment of plastic mould Mould surface treatment is systematic engineering to change the morphology, chemical composition, structure, and stress state of die surface by surface coating, surface modification, or composite treatment technology to obtain the required surface...
We believe quality begins with mould design capability and consider it to be the key to successful mould making.
Our company manufacturing high quality plastic injection mold like car radiator tank, mask grille, engine coolant tank, fan and fan shroud, car interior part, car rear view mirror.
Our company manufacturing high quality plastic injection mold like car radiator tank, mask grille, engine coolant tank, fan and fan shroud, car interior part, car rear view mirror.
Mould Design for Car Fog Lamp Hood injection Mould We have highly skilled software, including the latest tools in CAD-CAM, Unigraphics and Pro / Engineer wildfire, by providing them with simulations and alternatives for the development of alternative products with great practical application for...
We are professional in making kinds of auto parts mould. Such as car radiator water tank mould, fan and fan shroud mould, auto interior part mould, grille mould, ,fender mould, car light mould, car rear view mirror etc.
Our company manufacturing high quality plastic injection mold like car radiator tank, mask grille, engine coolant tank, fan and fan shroud, car interior part, car rear view mirror.
Place of Origin:Zhejiang, China (Mainland)
Model Number:Customized
Shaping Mode:Plastic Injection Mould
Product Material:Steel
We are professional in making kinds of auto parts mould. Such as car radiator water tank mould, fan and fan shroud mould, auto interior part mould, grille mould, ,fender mould, car light mould, car rear view mirror etc.
Our company manufacturing high quality plastic injection mold like car radiator tank, mask grille, engine coolant tank, fan and fan shroud, car interior part, car rear view mirror.
Our company manufacturing high quality plastic injection mold like car radiator tank, mask grille, engine coolant tank, fan and fan shroud, car interior part, car rear view mirror
Place of Origin:Zhejiang, China (Mainland)
Model Number:Customized
Shaping Mode:Plastic Injection Mould
Product Material:Steel
Place of Origin:Zhejiang, China (Mainland)
Model Number:Customized
Shaping Mode:Plastic Injection Mould
Product Material:Steel
Place of Origin:Zhejiang, China (Mainland)
Model Number:Customized
Shaping Mode:Plastic Injection Mould
Product Material:Steel
We are professional in making kinds of auto parts mould. Such as car radiator water tank mould, fan and fan shroud mould, auto interior part mould, grille mould, ,fender mould, car light mould, car rear view mirror etc.
Taizhou Tuofang Plastic Mould Co.,Ltd has been focus on plastic injection mold and molding service ever since its foundation. We have professional engineering and sales team.
Place of Origin:Zhejiang, China (Mainland)
Model Number:Customized
Shaping Mode:Plastic Injection Mould
Product Material:Steel
This truck radiator tank mould is with ten interchangeable insert to make ten diffirent type water tank
Our company manufacturing high quality plastic injection mold like car radiator tank, mask grille, engine coolant tank, fan and fan shroud, car interior part, car rear view mirror.
As one of the leading motorcycle cover inner mould suppliers in China, we warmly welcome you to buy motorcycle cover inner mould made in China here and get quotation from our factory. All customized products are with high quality and competitive price.
Tuofang company is specialized in designing and manufacturing Plastic Injection.
No. 71 Hequ Road, Chengjiang Street of Huangyan, Taizhou City, 318020, Zhejiang Province, China
