Views: 0 Author: Site Editor Publish Time: 2020-08-31 Origin: Site
The stationary eiectoro plate can be actuated with side hooks as shown in Fig. 6. 45, and the side hook 17 can be lifted out with the nose of a control hook 15 fixed to the stationary clamping plate 12.
Operation: When the mold opens, the stationary ejector plate 1l moves together with movable because the hook 17 anchors the movable mold part. The workpiece is out of the hole-shaping in 10. After the ejector plate ll has been lifted to the required extent, hook 17 is pushed out of thesupporting ejector plate 8 by the nose control plate 15, and so the motion of plate 11 is stopped. The side hooks are always used in pairs. The use of the control hook generally results in lifting the ector plate 11 along a longer path
