Why do plastics often deform, bend and twist? Because the shrinkage rate in the flow direction is larger than that in the vertical direction when plastics are molded, plastics often deform, bend, a...

Plastic mold steel is divided into pre-hardened ordinary plastic mold steel, pre-hardened high-quality plastic mold steel, pre-hardened high-hardness plastic mold steel, pre-hard anti-corrosion mirror

In order to improve the performance of the mold, many manufacturers will properly process their molds. Mold processing refers to the processing of forming and blanking tools. In addition, it also i...

1. Shrinkage rate The factors affecting the shrinkage of thermoplastic molding are as follows: 1.1 Plastic Variety During the molding process of thermoplastic plastics, there are still volume chang...

The injection molded part breaks when it is ejected, or is easy to break or crack during handling, how to solve it? The following gives the cause analysis and suggested remedies from several aspects 1

The Chinese New Year is over and today is the first day of work. If you need an inquiry for a mold project, please contact with Tuofang Mould #mold #Chinainjectionmouldmaker #moldfactoryinTaizhoucity

Mold Spending Fell 31% In North American Automotive Industry In the first three quarters of 2020, the North American automotive industry and its mold suppliers faced difficult journey, and the futu...

Car lamp mould ship to Brazil