There are brake lights, turn signals, driving lights, etc. in the car tail light assembly. The light source of the tail light has gradually developed from bulbs to LED light sources, and the next development direction will be OLED light sources and laser light sources.
| Quantity: | |
|---|---|
Car tail light mould (customizable)
There are brake lights, turn signals, driving lights, etc. in the car tail light assembly. The light source of the tail light has gradually developed from bulbs to LED light sources, and the next development direction will be OLED light sources and laser light sources.
Tail lamp LENS molds are developing in the direction of three colors and four colors. The tail lamp bezel is developing from a single color mold to a two-color mold. With the merger of the tail lamp parts and simplified, the tail lamp HOUSING mold has both light distribution patterns and skin texture requirements The appearance area. This leads to increased difficulty in mold development.
The tail light product material is ABS or PC ABS. Aluminum plating is usually required. The structure of most taillight housings is relatively complicated. Generally, there are multiple reflective bowls on the front and aluminum plating is required. The requirements are high. There are mounting points and sealing ribs on the reverse side. There are many features, resulting in taillight housing molds. There are many inserts, and most of the features cannot be achieved through normal demolding. Mechanical mechanisms such as sliders, internal draws, and inclined tops are widely used. The lamp socket of the taillight shell should be made into inserts as much as possible, and the bulb sockets are all touched through. The shapes of the left and right parts are generally translational. The inserts are easy to process, adjust and change. The main ejection of taillight shell mold is dome, tube top, flat top and block top are also frequently used. There are many mold inserts for taillight shells, so cooling and pattern inserts should be considered when designing inserts. Larger inserts generally need to be drained, and some inserts need to be cooled with beryllium copper material when necessary.
Hot Tags: customizable car tail light mould, China, suppliers, factory, customized, quotation, made in China, Good Quality Bucket Mould, Safety Helmet Mould For Industrial Product
Car tail light mould (customizable)
There are brake lights, turn signals, driving lights, etc. in the car tail light assembly. The light source of the tail light has gradually developed from bulbs to LED light sources, and the next development direction will be OLED light sources and laser light sources.
Tail lamp LENS molds are developing in the direction of three colors and four colors. The tail lamp bezel is developing from a single color mold to a two-color mold. With the merger of the tail lamp parts and simplified, the tail lamp HOUSING mold has both light distribution patterns and skin texture requirements The appearance area. This leads to increased difficulty in mold development.
The tail light product material is ABS or PC ABS. Aluminum plating is usually required. The structure of most taillight housings is relatively complicated. Generally, there are multiple reflective bowls on the front and aluminum plating is required. The requirements are high. There are mounting points and sealing ribs on the reverse side. There are many features, resulting in taillight housing molds. There are many inserts, and most of the features cannot be achieved through normal demolding. Mechanical mechanisms such as sliders, internal draws, and inclined tops are widely used. The lamp socket of the taillight shell should be made into inserts as much as possible, and the bulb sockets are all touched through. The shapes of the left and right parts are generally translational. The inserts are easy to process, adjust and change. The main ejection of taillight shell mold is dome, tube top, flat top and block top are also frequently used. There are many mold inserts for taillight shells, so cooling and pattern inserts should be considered when designing inserts. Larger inserts generally need to be drained, and some inserts need to be cooled with beryllium copper material when necessary.
Hot Tags: customizable car tail light mould, China, suppliers, factory, customized, quotation, made in China, Good Quality Bucket Mould, Safety Helmet Mould For Industrial Product
