The Workpiece Is Removed From The Mold By A Strpper Plate
You are here: Home » News » News » The Workpiece Is Removed From The Mold By A Strpper Plate
The Workpiece Is Removed From The Mold By A Strpper Plate
You are here: Home » News » News » The Workpiece Is Removed From The Mold By A Strpper Plate

The Workpiece Is Removed From The Mold By A Strpper Plate

Views: 0     Author: Site Editor     Publish Time: 2020-08-22      Origin: Site

Inquire

The Fig6.27 shows the workpiece removed from the mold by a stripper. The forming core 14 or insert arranged in the stationary part moves in an axial direction.

Operation: The cooling workpiece, as it shrinks, adheres to mold parts 14,9 and 10. The puller 12 draws waste out of the sprue bush 11 when the mold opens.Following the opening of the mold, the workpiece is drawn out of upper mold cup 15 that forming insert 14 arranged in the stationary mold part can also

moves a few millimeters in the axial direetion, Limit serew 8 pull up stripper plate 3 that pulls the workpiece ofl sleeve 9 and pin 10, and the residual is removed from puller 12 and falls out of the mold simultaneously.

Advantage: a distributing runner is designed for each pair of workpieces in order to reduce the amount of residual material, Gates are designed in tangentially direetion that the material runs tangentially into the mold cavity.

Disadvantage: the lack of space that limits the opening and ejecting distance, The cooling water duets are arranged only in the lower and upper clamping plates.

未标题-9


Main Products

Contact Us

About Company

Tuofang company is specialized in designing and manufacturing Plastic Injection.

  No. 345 Xinjiang Road, Xinqian Street of Huangyan, Taizhou City, 318020, Zhejiang Province, China

  +86-13757669623
 tuofang@chinatuofang.com

Quick Links

Product Category

Our New Letter

 Copyrights  2024 Taizhou Tuofang Plastic Mould Co.,Ltd. All rights reserved.  Sitemap