Neste, Mitsui Chemicals and Toyota Tsusho Co., Ltd. announced that they will join forces to use 100% bio-based hydrocarbons for industrial-scale production of renewable plastics and chemicals for t...

The injection mold cavities are distributed in 2 or more levels, in an overlapping arrangement, which is equivalent to stacking multiple pairs of injection molds together. The high-efficiency laminate

1. The structure of the injection plastic mold affects the shrinkage of the injection product The gate type of the plastic injection mold has an effect on the shrinkage of the injection product. Wh...

Tuofang Mould Exhibition, Chongqing city China

Tuofang Mould Exhibition, Chongqing city China

One: Exhaust injection molding Exhaust injection molding: The main purpose of exhaust is to allow the gas generated during the cooling and solidification of the plastic to have a chance to exhaust....

Due to the ultra-high fluidity of plastic, it will cause certain errors between the plastic parts produced by injection molding and the drawings, especially for some injection molded parts that requir

The way the plastic flows into the mould is of paramount importance in determining the quality of the part. The process of filling the mould can be distinctly analyzed with the ability to predict pres

Acceptance standards for plastic injection molds Purpose: To ensure that the mold can produce qualified products, put into normal production, ensure the service life of the mold, and meet the produ...