Main Risk Factors Of Injection Molding Machining

Views: 0 Author: Site Editor Publish Time: 2021-03-30 Origin: Site

1. The main dangerous areas of injection molding machines

The injection molding machine works quickly under the conditions of strong, high speed, high temperature and high pressure, and its injection mechanism is a high pressure, high speed and local high temperature machine.

The main danger areas of the injection molding machine are as follows

Feeding area: Because there is screw rotation in this area, do not put iron rods or other foreign objects in it;

Material tube cover area: This area is the raw material heating area, the temperature is extremely high and there is a danger of electric shock;

Nozzle area: This area is where the raw materials are injected at high pressure, and there is a danger of spraying;

Mold area: This area is a high-speed and high-voltage switch action area of the mold, which is quite dangerous. In addition, the raw materials may also be sprayed from the clamping surface of the mold, which requires special care;

Undercarriage area: has strong mechanical action, need to be particularly careful;

Clamping mechanism: It has high-speed and strong mechanical action, so you need to be careful.

2. Major dangerous and harmful factors

① Mechanical risk factors;

② Thermal damage factors;

③ Electrical injury factors;

④, harmful substances;

⑤ Environmental factors;

⑥ Factors of human unsafe behavior.

3.Dangerous and harmful factors of peripheral equipment of injection molding machine

1.Hot air hopper dryer;

2.Fully automatic filling machine;

3.Automatic take-out machine;

4. Plastic crusher.