What Kinds of Buckets We Could Do? Suqare Shape: 2L,4L,5L,8L,10L,12L,16L,18L,20L Round Shape: 1L,5L,6L,10L,16L,25L Choose the size you need, and tell us your requirements. And we make machted lid and handle. Bucket Mould Standard 1. Check the bucket size and the surface,if reach the client's...
| Quantity: | |
|---|---|
What Kinds of Buckets We Could Do?
Suqare Shape: 2L,4L,5L,8L,10L,12L,16L,18L,20L
Round Shape: 1L,5L,6L,10L,16L,25L
Choose the size you need, and tell us your requirements.
And we make machted lid and handle.
Bucket Mould Standard
1. Check the bucket size and the surface,if reach the client's requirement.
2. When ejection,if every part could fulfilled and even.
3. Check the flash.
4. If all the parts could demold well-off.
5. If the slide run freely.
6. Cooling system smooth,no leakage.
Tuofang Mould Service
* After we have an order, every week we will have a mould report show the mould process.
* Explain the mould operation, and well know what we do.
* Before the mould delivery, we send samples for our clients.
* After mould delivery, we will inform you about the mould maintain.
* Mould expiration date for 1 year.
Eight Aspects of Injection Moulding Maintenance
1. Sliding parts, guide parts, cores, on the mold should be observed at any time, regularly checked, and explained in shift record.
2. Mold rust and oil removal treatment.
3. Heating, maintenance of control system is especially important for hot runner molds.
4. Operator should remove residual materials in time, keep inside and outside of mold inside injection moulding machine clean and tidy, and do a good job in resettlement management and civilized production.
5. Strengthen life cycle management of mold and strictly implement mold resume card system.
6. Full-time maintenance personnel of injection moulding should prepare a mold maintenance plan and maintain mold as planned.
7. A mold library should be set up, special personnel should be set up, and mold files should be established, and computer management should be carried out on molds if conditions permit.
8. For storage and retrieval of forming mold, special tools (such as electric forklifts) should be used as much as possible to make mold move smoothly.
More Detailed Information Contact Me.
Hot Tags: 15l square plastic paint bucket injection mould with lid, China, suppliers, factory, customized, quotation, made in China, Industrial Moulds, Paint Bucket Mould For Industiral, paint bucket die mould, 4ltr Paint Bucket Plastic Mould, Electrical Control Parts Mould, 2ltr Paint Bucket Injection Mold
What Kinds of Buckets We Could Do?
Suqare Shape: 2L,4L,5L,8L,10L,12L,16L,18L,20L
Round Shape: 1L,5L,6L,10L,16L,25L
Choose the size you need, and tell us your requirements.
And we make machted lid and handle.
Bucket Mould Standard
1. Check the bucket size and the surface,if reach the client's requirement.
2. When ejection,if every part could fulfilled and even.
3. Check the flash.
4. If all the parts could demold well-off.
5. If the slide run freely.
6. Cooling system smooth,no leakage.
Tuofang Mould Service
* After we have an order, every week we will have a mould report show the mould process.
* Explain the mould operation, and well know what we do.
* Before the mould delivery, we send samples for our clients.
* After mould delivery, we will inform you about the mould maintain.
* Mould expiration date for 1 year.
Eight Aspects of Injection Moulding Maintenance
1. Sliding parts, guide parts, cores, on the mold should be observed at any time, regularly checked, and explained in shift record.
2. Mold rust and oil removal treatment.
3. Heating, maintenance of control system is especially important for hot runner molds.
4. Operator should remove residual materials in time, keep inside and outside of mold inside injection moulding machine clean and tidy, and do a good job in resettlement management and civilized production.
5. Strengthen life cycle management of mold and strictly implement mold resume card system.
6. Full-time maintenance personnel of injection moulding should prepare a mold maintenance plan and maintain mold as planned.
7. A mold library should be set up, special personnel should be set up, and mold files should be established, and computer management should be carried out on molds if conditions permit.
8. For storage and retrieval of forming mold, special tools (such as electric forklifts) should be used as much as possible to make mold move smoothly.
More Detailed Information Contact Me.
Hot Tags: 15l square plastic paint bucket injection mould with lid, China, suppliers, factory, customized, quotation, made in China, Industrial Moulds, Paint Bucket Mould For Industiral, paint bucket die mould, 4ltr Paint Bucket Plastic Mould, Electrical Control Parts Mould, 2ltr Paint Bucket Injection Mold
